The PE Adhesive Film is made of PE as the base material with double-sided ceramic nanomaterials coated on it. The main specifications include thicknesses of 12/14/16μm. It helps reduce the risk of internal short circuits caused by lithium dendrite penetration, improves battery production yield, and offers enhanced performance in battery safety testing. This product can be used for battery separator, oil-absorbent membrane, greenhouse film and silage wrap. During use, the product needs to be fixed through the battery slot for isolation.
POE Adhesive Film is primarily manufactured by processing Polyolefin Elastomer (POE) through the following process: Hot Melt – Casting/Calendering – Cooling & Forming. The thickness is between 0.4 and 1.0mm. This product features soft touch, excellent elasticity, and enhanced yellowing resistance. This product can be used for photovoltaic(PV) and some other fildes.
PE Adhesive Film made of PE as base material with double-sided ceramic nanomaterials coating; available in thicknesses of 12/14/16μm; reduces internal short circuit risk from lithium dendrite penetration, improves battery production yield, and enhances battery safety test performance.
POE Adhesive Film manufactured via Hot Melt – Casting/Calendering – Cooling & Forming from Polyolefin Elastomer (POE); thickness ranges 0.4-1.0mm; has soft touch, excellent elasticity, and enhanced yellowing resistance.
1. PE Adhesive Film applications: Suitable for battery separators (aiding in reducing internal short circuits and improving battery safety), oil-absorbent membranes, greenhouse films, and silage wraps.
2. POE Adhesive Film applications: Used in photovoltaic (PV) systems and other related fields, leveraging its softness, elasticity, and yellowing resistance.
1、 Place the laminated stack into the lamination press.
2、 Evacuate vacuum for 4-6 minutes.
3、 Apply pressure at 1 Bar.
4、 Maintain 1 Bar pressure for 6-15 minutes.
5、 Remove and cool the laminated product.
a. Prepare the laminated stack.
b. Low-temperature vacuum stage: Evacuate vacuum at 120°C for 3-5 minutes.
c. Low-pressure bonding: Apply pressure for 4-6 minutes, then hold for 5 minutes.
